The iPhone Air 2 might have two rear cameras, but many other elements could be unchanged.

HTX Studio this week shared the results from a six-month battery test that compared how fast charging and slow charging can affect battery life over time.


Using six iPhone 12 models, the channel set up a system to drain the batteries from five percent and charge them to 100 percent over and over again. Three were fast charged, and three were slow charged.

Another set of iPhones underwent the same test, but with charging initiated at 30 percent and stopped at 80 percent, so the iPhones were always in that range.

Prior to the experiment, the capacity for each phone was tested, and after 500 cycles, the capacity was tested again. The results suggest there is minimal additional battery drain from fast charging, but keeping an ‌iPhone‌ between 30 and 80 percent charge could be minimally beneficial.

HTX Studio concluded that the best way to charge an ‌iPhone‌ is "however you like," without overthinking it and trading mental energy for a tiny bit of battery life. The same video also includes Android tests, and is well worth watching in full for those curious about the effects of fast charging.
This article, "In-Depth iPhone Battery Experiment Pits Slow Charging Against Fast Charging" first appeared on MacRumors.com

Discuss this article in our forums

Apple's first foldable iPhone will feature an industry-first 24-megapixel under-screen camera built into the inner display, according to the latest JP Morgan equity research report seen by MacRumors.


We've previously heard rumors that Apple will use an under-display camera for the book-style foldable's inner display, but this is the first reference to the camera's proposed megapixel count.

Under-display camera technology has been used on some Android phones, but they tend to have lower resolution sensors (4 or 8 megapixels, for example) because the image quality suffers due to being behind display layers.

The jump to a 24-megapixel camera (with six plastic lens elements, per the report) would therefore be a significant technological advance, potentially resulting in clearer, sharper images with more detail. The detail suggests Apple has achieved a breakthrough in greatly improving light transmittance and image quality compared to previous designs.

However, the JP Morgan forecast also suggests Apple has made some compromises to keep the foldable device compact, such as a lack of LiDAR and optical image stabilization.

Apple's foldable iPhone is expected to include a dual-lens rear camera, with a front-facing camera for both folded and unfolded states, according to Apple analyst Ming-Chi Kuo. Bloomberg's Mark Gurman recently corroborated reports that the device will have four cameras consisting of one front camera, one inner camera, and two rear cameras. Prolific Weibo-based leaker Digital Chat Station claims that the rear dual lenses will be 48 megapixels each.

Other sources have claimed that the inner display features an under-screen camera, while the outer display – in the device's folded state – will have a punch-hole camera. Apple is reportedly relying on Touch ID integrated into the side button instead of Face ID for biometric authentication.

Gurman has said he expects the device to be launched next year in the fall season. However, Japan's Mizuho Securities banking firm has suggested a postponement to 2027 could still happen because of Apple taking longer to decide on key design elements such as the hinge.
This article, "iPhone Fold to Feature Industry-First 24MP Under-Display Camera" first appeared on MacRumors.com

Discuss this article in our forums

Ecovacs recently came out with its newest robot vacuum, the Deebot X11 Omnicyclone. Like the last couple of models, this new vacuum has Matter integration and it's able to connect to HomeKit so it can be sent off to clean the floor with Siri voice commands.

Design

The X11 is the same size as the prior-generation X9, coming in at 3.86 inches tall. I've tested several robot vacuums now, and that's on the thinner side. It can get under almost all of my furniture, including my stove, to vacuum in areas that are often untouched.

Height is the most important metric when it comes to robot vacuums, but if you have a lot of tightly spaced furniture, you also need to consider width. The X11 is about 13.8 inches across, and it could be too large for smaller apartments.


Underneath the vacuum, there's a roller bar, a mop, a brush that gets into nooks and crannies along baseboards, a canister for dust and debris, and internal areas for clean and dirty water for mop washing and cleaning. You can access the dust canister by removing the top plate of the robot and undoing the latch.


Exterior vacuum design didn't change much between the X9 and the X11, but the X11's base station is entirely different. It's significantly larger than before because it includes a reusable canister for dust instead of a bag.

The canister is why the X11 has its "Omnicyclone" name. It reminds me of a Dyson-style vacuum canister, and it's built right into the middle of the base station. You can pop it out and empty it into the trash, then stick it right back in. Large chunks of debris can get stuck, so as with a Dyson, the canister can need cleaning at times. There is no need to buy bags with the X11, which does make it stand out from other robot vacuums on the market.


Along with the vacuum canister, the base station houses a 2.7-liter dirty water tank and a 3.2-liter clean water tank. The water tanks are larger than the tanks in the X9, which means less maintenance. I fill the clean water tank less, and I try to remember to empty the dirty water tank regularly because it can get smelly if it sits.


Inside the base station, there's a spot to add cleaning fluid. The X11 supports two kinds of cleaning fluid, one for standard cleaning and one for deep cleaning. Two cleaning fluid options are more expensive and more of a hassle, so I'm not a fan of the dual cleaning. Ecovacs recommends that you use Ecovacs cleaning fluid, and it sells the two variants.

Setup and Maintenance

Setting up the X11 is straightforward enough that anyone can do it. There's a single-page startup guide that has easy instructions on putting the base station components together, then it's just a matter of filling the water tank, downloading the app, turning on the robot, and following the app steps for pairing.

The X11 is simple enough that someone not technologically inclined could operate it, but the number of app settings and complicated features like voice activation could be confusing. None of those features are required, and it can clean on default settings, but if you have older parents who struggle with electronics and buy this (or any robot vacuum) for them, you're going to get calls for troubleshooting.

There is maintenance to take care of, like occasionally replacing the rollers and brush with parts purchased from Ecovacs. The site sells a bundle that includes a new roller brush, three filters and two side brushes for $60, and a new roller mop is $35.

Vacuuming

The X11 has the strongest suction of any robot vacuum that I've tried. It is excellent at picking up pet hair, dust, and debris on my hardwood and tile floors. I started tossing a handful or two of dirt on the floor to see how much robot vacuums can clean up, and the X11 got almost all of it in the first pass.

Robot vacuums are meant to clean regularly rather than deeply, which is why it's not an ideal test, but it does give me a clear metric to compare by.


According to Ecovacs, the X11 has 19,000 Pa suction and it uses the same Blast system (multi-stage suction and airflow) from prior Ecovacs robots. It's more suction than the X9, which I already thought worked well, and more suction than the Roborock vacuum I use regularly. If you have hard floors and pets or kids, it's good at getting up even trace amounts of pet hair, and it doesn't miss crumbs in the kitchen.

There's a side brush for sweeping along baseboards and in corners, and it's able to get most dirt and fur up. You'll want to manually vacuum in corners every so often, but it's not a situation where the X11 is vacuuming the main area of a room and pushing dust to the sides. It is able to use the added side brush and the improved suction to do a passable job keeping hard to reach areas clean.

Ecovacs' robots have a ZeroTangle brush, and it works. I have long hair, my partner has long hair, and we have two cats. I haven't seen the brush get tangled up with hair, and I've never had to fuss with it.


The X11 is able to get over higher thresholds than prior Ecovacs robots, so if you have a tall threshold that other robots can't handle, the X11 might be able to navigate it. It can go over thresholds as high as 2.4cm (0.95 inches). It can get into a bathroom that has a higher than average threshold, but another room with a baby gate has a threshold too high for it to overcome. I definitely notice a difference between the X11 and the older X9 when it comes to threshold navigation.

Despite stronger suction, the X11 isn't louder than prior models, measuring in at around 62 dBA in tests. I wouldn't want to sleep while the X11 is running, but I can work while it's on if I put in my AirPods Pro to block out the noise. Emptying the vacuum into the canister at the base station is the loudest action that it performs (close to 80 dBA), so keep that in mind when positioning the base station.

The X11 is one of the quieter robot vacuums that I've tried in terms of straight vacuuming and operation sound, and it has a mode that makes it even quieter. Turning down the suction level will also help.

Mopping

Like Ecovacs' prior-generation high-end robots, the X11 has a roller mop rather than two rotating mopping pads. I am a fan of this design because it continually removes dirty water, so it's washing the floor with clean water.


It sprays water onto the mop, cleans the floor, and squeezes the dirty water into a collection tank before starting the process over again. With this version, the roller extends out further, so it can get into corners. It's also supposed to have stain-detecting AI to go over a dirty area again, and I've seen this work as long as certain AI cleaning modes are enabled.

With wet stains, the X11 can get a mess in one go. A squirt of ketchup on the floor, for example, gets wiped up with a single cleaning. With dried-on stains, it can take a few passes. I tested dried ketchup, and needed to have the robot go over it three times to get every speck up. Anecdotally, the X11 seems to be better at getting up things like dried up cat food in fewer passes than prior Ecovacs robots.

Every so often, the X11 returns to the base station to wash the mop with hot water, and when a cleaning is finished, it's dried with hot air.

I wouldn't expect any robot vacuum to get a floor entirely spotless in one cleaning, but weekly cleanings paired with daily cleanings in specific areas like the kitchen keep the floors clean.

Time

Cleaning 2,000 square feet takes the X11 approximately five hours on the standard setting with one pass, though that can vary depending on the number of passes that it's instructed to make when mopping, how often it empties the vacuum and washes the mop, and how far it is from the base station. That time is fairly standard for the robot vacuums that I've tested, though some will take longer because of long periods for charging.

I find it useful to set up scheduled cleanings with the Ecovacs app or the Home app. I schedule the X11 to clean one area of the house per day, which keeps the floor clean but doesn't subject me to listening to a vacuum run for hours on end. It can be set to clean after meal times or more frequently just in high traffic areas, which is helpful.

Navigation and AI

When you set up the X11 for the first time, it maps each room in your house prior to cleaning. You can see the map as it goes, and it's clear that the lidar sensor at the front works well. It made a perfect map of my house, though unlike some other robot vacuums, it doesn't detect furniture and add those items to the map automatically, nor is it great at labeling rooms.

It can detect some thresholds, but it's best to go in and edit the map to make changes. My house has an open-concept main area, and it wasn't able to distinguish between the kitchen, dining room, and living room, and it also merged one bedroom with those areas. In my office, it wasn't able to tell the bathroom from the main office area, I suppose because it didn't detect the door.


The X11 is good at obstacle avoidance, using a camera-based sensor system for object detection. It hasn't run directly into anything, and it is better at not getting trapped by furniture. It knows where walls are, where furniture legs are, and it can detect and avoid items on the floor like cables, socks, pets, and more. It doesn't see smaller items like LEGO bricks, and it can suck those up.

Some vacuums will label the in-app map with items that have been detected so you can go in and tell them whether to avoid that item in the future. The X11's object detection is more behind-the-scenes, so I don't get a readout of what it's avoiding.

It's good at navigating the house, though I did see it get inexplicably lost one time. It might have been that the hallway was too dark, but it couldn't find its way back to the dock in another room.

The AI in the X11 is more transparent than in prior models, and I can better keep track of what the robot is doing, why it's doing it, where it's cleaned, where it hasn't cleaned, and where access was blocked by a closed door or another obstacle.

Rugs

I've been frustrated with the way the Ecovacs robots handle small rugs, and there's no change with the X11 Omnicyclone. It regularly gets trapped on the rugs in bathrooms and thin, soft-backed rugs on my wood floors that don't have grip. It also cannot handle tassels. By "trapped," I mean that the roller vacuum sucks up the rug and can't release it, so I'm forced to go pull it out and set the vacuum to continue cleaning.


To be fair, Ecovacs does recommend picking up smaller rugs and tucking tassels away underneath the rug to avoid these issues, but that's a hassle. It's annoying to have to fix the vacuum when it sucks up a rug, and it's annoying to have to take the time to move everything out of the way every time it's running. Having to regularly move rugs makes it more difficult to automate and schedule cleanings.

With bigger, thicker rugs anchored by furniture, the X11 works with no issue. I have one rug that sheds like crazy even two years after I bought it. Sometimes the X11 will leave behind a big ball of rug fuzz, but all of my vacuums do that. My Dyson can't even clean that rug without getting clogged.


There is another rug in my laundry room that is an absolute dirt and lint magnet, and the X11 can get every speck of dust off of it. I'm satisfied with how well it cleans rugs, but it needs to be better about not getting stuck.

Battery

The X11 has a fast-charging feature where the robot can go back to the base station and quick charge for about 10 minutes. For a large home, this means that there's no multi-hour pause in cleaning.


With prior Ecovacs robots, there would be a long break for charging in the middle of a cleaning. With the X11, it cleaned for six hours straight with only brief stops to quick charge.

Ecovacs recommends the fast charge system for homes that are over 2,000 square feet, and there is an option to turn it off for smaller homes. Faster charging works well, and it sets the X11 apart from other vacuums. If you have a large home, it's a reason to consider this model over other options.

Ecovacs App

Even if you're planning to use the X11 with the Home app and through ‌Siri‌ voice commands, you need the Ecovacs app. It's the only place to manage the many, many settings that are available for the vacuum, and it houses the map the robot uses for navigation.


There are settings to adjust the vacuum suction, mopping water level, noise, and set up different types of cleaning such as after-meal cleaning, daily cleaning, and deep cleaning. You can set up custom scenarios for future one-touch cleanings, customize charging and station settings, adjust settings for carpet, view cleaning logs, and more. There's more than I can go over in a review, but if you get an Ecovacs robot, expect to spend a half-hour or so going through the options selecting your preferred parameters.

The X11 has an AI cleaning mode that incorporates cleaning history and preferences that you set. You can customize it with natural language commands, and it's meant to learn over time. It's new to this model, and it wasn't a feature that was available in prior Ecovacs robots I've reviewed.

The AI mode is listed in the app as "Agent Hosting," and you can tap on it instead of "Start" when beginning a cleaning. The AI will analyze your prior cleaning, take into account your app settings and preferences you've provided, and then adjust its settings on its own to clean the house.


I've had mixed results with it, but I'm still working on customization. The first time I used it, it determined that the living room hadn't been cleaned for seven days, so it proceeded to clean it for like three hours (two passes) even though it wasn't dirty (the X11 hadn't vacuumed the floor in a week because I had). There is an AI feature that's supposed to notice messes and do another pass, but it clearly wasn't using that when evaluating how to clean.

The AI cleaned for 5.5 hours, and because it was doing double passes everywhere, it didn't get the task finished. I had to turn it off at around 11 p.m., and I wasn't able to resume the cleaning the next day because it can't pick up a task if the pause is more than a few hours.

In other tests, the AI performed better and selected reasonable cleaning parameters for various rooms, successfully executing a cleaning. I like that I can see what the AI is thinking and follow along as it completes each task, but there is a major issue I've run into. For some reason, the X11 has the wrong time. I started a clean at 2:30 p.m., and it thought it was 2:30 a.m. Another time, it was around 11:00 a.m., and it thought it was 11:00 p.m. The time is an issue because it will adjust suction to avoid being too loud if it's late at night.

The AI cleaning option is useful overall if you don't want to mess with settings for every clean, but it also takes time and effort to train it with your preferences. Luckily, plain old "Start" launches a standard clean where you can select the options that you want.

There's also a "Yiko" voice assistant that you can use to direct the X11 to clean. It's been present in the last several Ecovacs robots, but I don't use it often. Yiko isn't super responsive when I attempt to activate it, doesn't understand some simple commands, and doesn't do enough where I can use it instead of the app.

Home App

The X11 has Matter integration, so it connects to the Home app. You only get a few controls in the Home app, but it's enough to operate it on a basic level.

You can have the robot vacuum or vacuum and mop, selecting the entire house or just a single room. You can also choose from a standard clean or a deep clean for two mopping passes instead of one. The app will let you know if there's an error, such as when the water tank needs to be filled up. You can also play a sound so you can locate the robot if it gets itself stuck somewhere in the house.


Matter integration is useful for the ‌Siri‌ voice commands and for automations. You can use the Ecovacs app for setting schedules, or do it through the Home app if you want to use geofencing (such as having the robot clean when you leave home) or pair it with other ‌HomeKit‌ accessories.

Siri

I don't often use the Home app with robot vacuums, but I like being able to use ‌Siri‌. There are HomePods in the main areas of my house, so I can say something like "Hey ‌Siri‌, clean the kitchen" if I happen to be in the kitchen and notice crumbs on the floor.

When I first used a robot vacuum with ‌HomeKit‌, I was skeptical that it would be useful, but it's been a convenience. I wouldn't necessarily buy a robot vacuum just for the Matter integration, but if there are two robots with similar features and only one has Matter, I'm going to choose the Matter version.

I am hoping that Matter integration with products like the Omnicyclone X11 gets even better when Apple introduces the new version of ‌Siri‌ that it's been working on, and when the rumored home hub comes out.

Bottom Line

The X11 has the strongest AI functionality of a robot vacuum that I've tested, and aside from its poor performance with thin rugs, it's the best vacuum that I've tried so far. I appreciate that the X11's AI can learn my cleaning preferences and adjust, but sometimes a simple scheduled cleaning with pre-set parameters is better than AI. There's a lot of redundancy in the Ecovacs app with the option to use AI, standard settings, or the Yiko voice assistant, and it can be confusing. I'd like to see streamlining in the future.


Matter integration isn't necessarily a reason to buy one robot vacuum over another, but it is useful if you have a lot of Apple devices and tend to use ‌Siri‌ voice commands for smart home devices.

The X11 isn't leagues ahead of the X8 and X9 when it comes to cleaning performance, but there are a few features that could be a reason to consider it instead of another robot vacuum. If there's a threshold in your house that other vacuums can't climb, there's a good chance the X11 can navigate it. It's the only robot vacuum I've tested that has a vacuum chamber you can empty, eliminating the need for vacuum bags.

For larger homes, the change to charging makes a difference in how quickly cleaning gets done, and it prevents frustrating multi-hour pauses. Fast charging could be worth the cost if you have a home larger than 2,000 square feet.

If you don't need those features, Ecovacs' X8 and X9 robots clean well too, and are available at a lower price.

How to Buy

The X11 Omnicyclone can be purchased from the Ecovacs website or from Amazon for $1,499.99, but there is a promo code for $200 off at the current time, which is listed on the website. There are regular sales on Ecovacs vacuums, so don't buy one at full price.

Note: Ecovacs provided MacRumors with an X11 for the purpose of this review. No other compensation was received.
This article, "Ecovacs Deebot X11 Omnicyclone Review: HomeKit Robot Vacuum With Bagless Design and Fast Charging" first appeared on MacRumors.com

Discuss this article in our forums

iOS 18.7.2 and iPadOS 18.7.2 are available for iPhone and iPad users who are not running iOS 26 and who do not want to install iOS 26.1 update onto their devices. The iOS 18.7.2 and iPadOS 18.7.2 updates are security releases and do not include any new features or changes. Separately, iOS 26.1, iPadOS 26.1, ... Read More

Apple has released iOS 26.1 for iPhone, and iPadOS 26.1 for iPad. These are the first major point release updates for iOS 26, and offer a few changes, new features, bug fixes, and security enhancements, and are therefore recommended for users running iOS 26 or iPadOS 26. You will find a new toggle for Liquid ... Read More

T-Mobile's early Black Friday deals are live - here's how to get up to four iPhone 17 for free with a super-cheap unlimited data plan.

Next year is shaping up to be a big one for Apple and its iPhone series, and new information has emerged.

Apple has changed how you dismiss iPhone alarms in iOS 26.1, and your morning muscle memory may have needed tweaking as a result. By default, the Clock app now requires a slide gesture to stop an alarm from the Lock Screen, replacing the previous tap-to-stop button that was redesigned in iOS 26. Snoozing still works with a simple tap, but turning off an alarm entirely demands the extra swipe motion.


The change appears designed to prevent accidental dismissals when you're reaching for your phone in the morning. By requiring a more deliberate action, you're less likely to silence your alarm when you meant to hit snooze. If you don't like the change, you can revert the alarm interface back to the previous Stop button by following these steps.

1. Open the Settings app on your iPhone.


2. Tap Accessibility.


3. Under "Physical and Motor," tap Touch.


4. Swipe to the bottom of the menu and toggle on Prefer Single-Touch Actions.

The change will take effect the next time you set an alarm. If you want to revert back to the slider, simply toggle off Prefer Single-Touch Actions.
This article, "iOS 26.1: Bring Back the Tap-to-Stop Alarm Button" first appeared on MacRumors.com

Discuss this article in our forums

Next year is shaping up to be a big one for Apple and its iPhone series, and new information has emerged.

Apple is expected to launch a new foldable iPhone next year, based on multiple rumors and credible sources. The long-awaited device has been rumored for years now, but signs increasingly suggest that 2026 could indeed be the year that Apple releases its first foldable device.


Below, we've collated an updated set of key details that have been leaked about Apple's foldable iPhone so far.

Overall Design

Book-Style

According to Bloomberg's Mark Gurman, Apple's foldable iPhone is similar in style to Samsung's Galaxy Z Fold, which uses a book-style folding mechanism, rather than the clamshell design of the Samsung Galaxy Z Flip. Industry analyst Ming-Chi Kuo expects the foldable ‌iPhone‌ to measure between 9 and 9.5 mm when folded, and around 4.5 to 4.8 mm when unfolded. More recently, Weibo-based leaker Instant Digital has said that the foldable iPhone will have a thickness of at least 4.8mm.

Display Sizes

Dual Screens

When folded, users will interact with a 5.5-inch outer display that is similar to a typical iPhone screen, while unfolding it will reveal a larger 7.8-inch iPad-style screen. The inner display is said to be virtually crease-free, thanks to Apple's use of a metal plate that can disperse and control the stress generated by bending the display. These dimensions have been corroborated by two reputable sources. According to one rumor, the inner folding display will be approximately the size of a piece of A6 paper and will use a 2,713 x 1,920 resolution, while the outer display will use a 2,088 x 1,422 resolution.

Chassis and Hinge

Durable Materials

The foldable iPhone reportedly has a titanium chassis, with the hinge constructed from a combination of titanium and stainless steel, according to Kuo. Apple is said to be using liquid metal in the hinges to improve durability and help eliminate screen creasing. Liquid metal, manufactured using a die-casting process, has been chosen by Apple to address these two common issues with foldable devices, according to the analyst. The frame itself will use a titanium alloy to prevent bending issues – a solution that has worked well for Apple's new ultra-thin iPhone Air. However, analyst Jeff Pu believes that Apple is using aluminum and titanium, whereas Kuo believes a mix of stainless steel and titanium has been chosen.

Cameras

Front and Rear

The foldable iPhone is expected to include a dual-lens rear camera, with a front-facing camera for both folded and unfolded states, according to Kuo. Bloomberg's Mark Gurman recently corroborated reports that the device will have four cameras consisting of one front camera, one inner camera, and two rear cameras. Prolific Weibo-based leaker Digital Chat Station claims that the rear dual lenses will be 48 megapixels each. Other sources have claimed that the inner display features an under-screen camera (USC), while the outer display – in the device's folded state – will have a punch-hole camera.

Authentication

Touch ID

Kuo believes the phone will forgo Face ID authentication, and instead use a Touch ID side button as a means to save precious internal space, and Bloomberg's Mark Gurman recently corroborated the rumor. Apple has previously integrated Touch ID into the side button of the iPad, iPad Air, and iPad mini.

Cellular Connectivity

C2 Modem

The foldable iPhone will use Apple's second-generation C2 modem for cellular connectivity, according to Bloomberg's Mark Gurman. Apple debuted its custom-designed C1 modem in the iPhone 16e earlier this year, followed by the C1X featured in the iPhone Air, as part of a multi-year plan to transition away from Qualcomm modems. Gurman says the foldable device will not have a physical SIM slot.

Battery Life

High-Density Cells

Apple is putting a heavy focus on improving power efficiency by slimming down key components like the display driver to make room for more battery cells, according to a Korean blog that has leaked accurate details about unreleased products before. The phone will reportedly use high-density battery cells. Expect the C2 modem to be faster overall, and for it to gain mmWave support in the United States. Further power efficiency improvements are likely too.

Color Options

Black and White

Apple is currently only testing variations of black and white for the folding phone with suppliers, according to Bloomberg's Mark Gurman, although he says that Apple's plans could evolve before the device launches.

Pricing

Premium Segment

Multiple reports have suggested the foldable iPhone will be priced between $2,000 and $2,500 in the United States, which could make it the most expensive iPhone ever. Meanwhile, analysts at investment banking firm UBS believe the phone will be between $1,800 and $2,000. However, Kuo recently claimed that the hinge is expected to carry an average selling price (ASP) of approximately $70 to $80 when mass production begins – well below the market expectation of $100 to $120 or higher. Kuo attributed the cost decline to "assembly design optimization" and Foxconn's influence in production scaling. Whether the reduction in hinge price will reduce retail price or simply bolster Apple's margins is an open question. Regardless of the price, the foldable is expected to tap into Apple's loyal fanbase, some of whom will view it as a "must-have device" if its quality meets expectations.

Launch Date

Late 2026

According to industry analyst Jeff Pu, the device entered the New Product Introduction (NPI) phase at Foxconn in March. Foxconn is expected to officially start producing Apple's foldable iPhone early in the fourth quarter (October), and a recent report has suggested Apple is already stockpiling components for pre-production. An exact launch date is currently unknown, but both Kuo and Pu say mass production is planned for the second half of 2026. Bloomberg reporter Mark Gurman has said he expects the device to be launched next year in the fall season. However, Japan's Mizuho Securities banking firm has suggested a postponement to 2027 could still happen because of Apple taking longer to decide on key design elements such as the hinge.
This article, "iPhone Fold: Launch, Pricing, and What to Expect From Apple's Foldable" first appeared on MacRumors.com

Discuss this article in our forums

After acquiring Serif last year, Canva has overhauled its Affinity design suite, consolidating three creative tools into a single free app for Mac and Windows.


The newly launched Affinity by Canva unifies vector, photo, and layout capabilities that were previously spread across separate Designer, Photo, and Publisher apps. So instead of juggling multiple apps, users can now switch between the three modes through dedicated Vector, Pixel, and Layout tabs within one interface.

The redesigned app includes a customizable workspace where creators can mix tools from different studios, rearrange panels, and save multiple setups for specific project types. Custom configurations can also be shared with teams and communities for standardizing workflows.

Following Canva's 2024 acquisition of Serif, the integration brings some other changes that might give longtime Affinity users pause. Everyone now needs a Canva account to access the software, but signing up is free. Canva premium subscribers also get AI tools directly within Affinity, including Generative Fill, Expand & Edit, and Remove Background features.

In a clear bid to rival Adobe, Canva's decision to ship the app for free is likely to be a welcome surprise for users who feared a subscription model was looming. "There's no catch, no stripped-back version, and no gotchas," said Ash Hewson, CEO of Affinity, commenting on the launch. But while Affinity insists the core app will remain free without restrictions, the account requirement and AI upsells signal a freemium approach. Whether longtime users will appreciate trading a one-time purchase for ongoing Canva integration remains to be seen.

An iPad version is planned for release next year, and existing Affinity V2 license holders can continue using their purchased software if they prefer to stick with the older model without the Canva integrations. Affinity can be downloaded from the Affinity Studio website.
This article, "Canva Relaunches Affinity as Free All-in-One Design App" first appeared on MacRumors.com

Discuss this article in our forums

Apple is building up inventory for its first foldable iPhone in preparation for the device's launch next year, claims a Chinese leaker with proven sources within Apple's supply chain.


According to Weibo-based account Fixed Focus Digital, Apple is now stockpiling key components for its long-rumored foldable iPhone, which we are tentatively referring to as "iPhone Fold." The leaker did not elaborate, but Apple is likely securing supplies of advanced parts including foldable OLED displays, titanium frames, and complex hinge assemblies that reportedly combine several materials.

The move suggests Apple is entering the crucial pre-production phase, where suppliers begin ramping output ahead of full mass production. Some of these components may have long lead times and high failure rates, so early stock-building helps reduce risk and smooth the eventual launch pipeline.

Apple's foldable iPhone is reportedly similar in style to Samsung's Galaxy Z Fold, which uses a book-style folding mechanism, rather than the clamshell design of the Samsung Galaxy Z Flip.

When folded, users will interact with a 5.5-inch outer display that is similar to a typical iPhone screen, while unfolding it will reveal a larger 7.8-inch iPad-style screen. The inner display is said to be virtually crease-free, with some sources claiming it features an under-screen camera. The outer screen is said to have a punch-hole camera, while authentication is handled by Touch ID integrated into the side button, rather than Face ID. There's also a dual-lens camera on the rear.

According to analyst Jeff Pu, the frame is made from a mix of titanium and aluminum. Apple analyst Ming-Chi Kuo has also said Apple is using multiple materials, but he believes the main ones are titanium and stainless steel. Kuo also believes some hinge components will be made from Liquidmetal for further durability.

The foldable ‌iPhone‌ is rumored to be as thin as 4.5mm when opened up, which would make it even thinner than the ‌iPhone Air, so titanium is likely being used to prevent bending issues‌. With display and mechanical engineering challenges unlike any current iPhone, Apple's logistical groundwork hints that its first foldable device may finally be nearing reality. The ‌iPhone Fold‌ is expected to be part of the iPhone 18 lineup, launching in September 2026.
This article, "Apple Stockpiling Parts for Foldable iPhone Ahead of 2026 Launch" first appeared on MacRumors.com

Discuss this article in our forums

Apple is apparently thinking about new colors for its flagship phones, and we haven't seen two of them before.

Apple's ongoing iPhone 17 Pro Max delivery delays suggest the company's best iPhone won't be going on sale for Black Friday.

Apple is apparently thinking about new colors for its flagship phones, and we haven't seen two of them before.

Kohler, the faucet and toilet brand, is expanding into the tech market in a rather innovative and unusual way; by launching Dekoda, a $600 iPhone-connected toilet camera that monitors your waste for various health metrics. Dekoda apparently can monitor your hydration levels and provide other information about your gut health, as well as detect signs ... Read More

We're starting to hear a few rumors around what Apple may have planned for the next set of flagship iPhones.

Apple introduced a new version of the Vision Pro with M5 chip this week, and it came with a Dual Knit Band that Apple says is more comfortable to wear for long periods of time. M5 Vision Pro buyers will get the new band automatically, but those who have an M2 Vision Pro also have the option to buy it separately.


It appears ‌M2‌ Vision Pro owners are eager for an accessory that makes the headset easier to wear, because the $99 Dual Knit Band is now backordered for at least a month. As of yesterday, new Dual Knit Band orders were delivering between November 7 and November 14, and wait times could get even longer.

There are some retail stores that may have the Dual Knit Band in stock starting next week, as the M5 Vision Pro will launch on Wednesday, October 22.

The Dual Knit Band is made from the same 3D knitted material as the Solo Knit Band, but it has a two-strap design. One strap fits at the back of the head as before, but a second strap goes over the top of the head for better weight distribution.

Apple also added tungsten inserts to the ribbed back loop for counterbalance and a fit that is supposed to improve balance and stability. Apple says that the Dual Knit Band is soft and breathable, with a Fit Dial to adjust each strap independently.

The Dual Knit Band is available in small, medium, and large sizes, and making a purchase requires using an iPhone's Face ID camera to find the right fit for your face size.
This article, "Apple's New Vision Pro Dual Knit Band Proves Popular" first appeared on MacRumors.com

Discuss this article in our forums

The launch of Apple's first foldable iPhone could be delayed to 2027, according to Japan's Mizuho Securities (via The Elec).


The investment banking and securities firm suggested that a potential postponement could be due to Apple taking longer to decide on key design elements such as the hinge. The device is expected to feature a 7.58-inch inner display and a 5.38-inch outer display.

The report added that expected production of display panels for the foldable ‌iPhone‌ have now decreased from 13 million to nine million units. A launch in 2026 is still said to be possible, but if it goes ahead as planned, device production in the first year of release may lag behind panel production by as much as five to seven million units.

The firm corroborated reports that Apple plans to delay the launch of the iPhone 18 to the spring of 2027, launching alongside the ‌iPhone‌ 18e. The iPhone Air 2, ‌iPhone 18‌ Pro, and ‌iPhone 18‌ Pro Max are scheduled to launch in the fall of 2026, likely alongside the first foldable ‌iPhone‌ if it is not delayed.

Further in the future, Apple is apparently developing new technology for the ‌iPhone‌ 19 lineup, treating the model as a special release due to it falling upon the 20th anniversary of the ‌iPhone‌. Moreover, Apple will apparently reduce the price of the second foldable ‌iPhone‌, which will likely launch in the fall of 2027 if the first model isn't delayed.

Mizuho Securities also noted that there is now movement in the supply chain to resume work on a 18.9-inch foldable MacBook for release around 2028 or 2029 at the earliest.
This article, "Launch of Apple's First Foldable iPhone Could Be Delayed" first appeared on MacRumors.com

Discuss this article in our forums