Apple has submitted production line orders for its upcoming foldable iPhone, effectively confirming that the device will launch this year, claims a Chinese leaker.


According to the Weibo account "Fixed Focus Digital," assembly lines recently received the orders from Apple, which has apparently allowed the leaker to learn the crease measurements for the device's 7.8-inch inner display.

The crease depth is said to have been controlled to under 0.15 mm. Crease depth refers to how deep the groove or indentation at the fold is. A smaller number means the crease is shallower and less noticeable to the eye and to the touch.

The crease angle is said to be under 2.5 degrees. Crease angle describes how sharp the fold line appears when the display is unfolded, which is measured as the angle formed at the crease area. A smaller angle indicates a smoother, flatter transition across the fold, rather than a sharp ridge or valley.

Unfortunately, competing foldable brands don't publish such crease measurements, so it's not easy to compare the figures against anything on the market. However, Apple's foldable iPhone is expected to feature a new type of display panel developed by Samsung that has never been used in a foldable product, and which has been described variously as being "virtually crease free" and having "no crease at all."

Separately, Chinese site UDN last year reported that Apple had solved "the crease problem" that has plagued most foldable smartphones, and the foldable ‌iPhone‌ will be the first crease-free foldable on the market.

Reports suggest Apple's foldable iPhone will feature a 7.8-inch main display when unfolded and a 5.5-inch cover display. The device is expected to adopt a book-style design similar to Samsung's Galaxy Z Fold, rather than a clamshell form factor.

According to analyst Ming-Chi Kuo, Apple's first foldable will include two rear cameras, a single front-facing camera, a single selfie camera on the inner display, and Touch ID integrated into the power button. The device could measure just 4.5mm thick when unfolded, and between 9mm and 9.5mm when closed.

Apple is expected unveil the foldable alongside the iPhone 18 Pro models in September, representing the biggest form factor change since the original iPhone in 2007.
This article, "iPhone Fold Crease Measurements Revealed as Device Hits Production" first appeared on MacRumors.com

Discuss this article in our forums

Apple is testing a different kind of foldable iPhone with a flip-style design, according to a known leaker based in Asia.


Citing supposedly verifiable supply chain information, the Weibo user known as "Fixed Focus Digital" says that Apple has tested a flip-style foldable ‌iPhone‌. Such a device would compete with devices such as Samsung's Galaxy Z Flip 7 and the modern-day Motorola Razr.

The rumored flip-device comes in addition to the wide foldable ‌iPhone‌ that is expected to launch later this year. Whether the flip-style foldable ‌iPhone‌ will reach mass production is apparently yet to be decided.

Earlier this month, Bloomberg's Mark Gurman said that Apple is "exploring" the idea of a foldable ‌iPhone‌ with a "square, clamshell-style" design.

The clamshell ‌iPhone‌ would be released at some point after Apple's first foldable iPhone, which is expected to open up like a book, similar to Samsung's Galaxy Z Fold 7. This design will provide users with a large inner display for watching videos and gaming, and there will likely be multitasking functionality. A clamshell ‌iPhone‌, on the other hand, would be more about portability and pocketability.

Other rumors suggest that Apple's first foldable ‌iPhone‌ will feature a 7.8-inch crease-free inner display, a 5.5-inch cover display, Touch ID, two rear cameras, the A20 chip, and the "C2" modem. It is expected to launch alongside the iPhone 18 Pro and ‌iPhone 18‌ Pro Max in the fall.
This article, "Apple Now Testing Flip-Style Foldable iPhone" first appeared on MacRumors.com

Discuss this article in our forums

Apple's first foldable could feature the biggest ever iPhone battery and eclipse rival devices, according to a known leaker.


In a new post, the Weibo user known as "Fixed Focus Digital" says that the foldable's battery could be over 5,500 mAh in size, which would make it the largest capacity of any current or previous ‌iPhone‌. The iPhone 17 Pro Max has the biggest ‌iPhone‌ battery to date at 5,088 mAh.

Competing foldables already on the market feature a noticeably smaller battery than the rumored size. The Google Pixel 10 Pro Fold has a battery capacity of 5,015 mAh, while the Samsung Galaxy Z Fold 7 has a 4,400 mAh battery. As a result, any foldable smartphone from Apple with a battery over 5,500 mAh in size would be class-leading.

Last year, the leaker known as "yeux1122" said that Apple was testing a battery for the device in the 5,400–5,800 mAh range, citing supply chain sources. A March report from the same Korean account claimed that Apple has placed a heavy focus on improving power efficiency while slimming down key components of its foldable ‌iPhone‌, with battery life said to be a key priority for the company. Separately, Apple analyst Ming-Chi Kuo said the device will use high-density cells to deliver superior battery life.

Apple's first foldable ‌iPhone‌ is rumored to feature a 7.8-inch crease-free inner display, a 5.5-inch cover display, Touch ID, two rear cameras, the A20 chip, and the "C2" modem. It is expected to launch alongside the iPhone 18 Pro and ‌iPhone 18‌ Pro Max later this year.
This article, "Apple's Foldable iPhone Rumored to Feature Unrivaled Battery Life" first appeared on MacRumors.com

Discuss this article in our forums

Apple is building up inventory for its first foldable iPhone in preparation for the device's launch next year, claims a Chinese leaker with proven sources within Apple's supply chain.


According to Weibo-based account Fixed Focus Digital, Apple is now stockpiling key components for its long-rumored foldable iPhone, which we are tentatively referring to as "iPhone Fold." The leaker did not elaborate, but Apple is likely securing supplies of advanced parts including foldable OLED displays, titanium frames, and complex hinge assemblies that reportedly combine several materials.

The move suggests Apple is entering the crucial pre-production phase, where suppliers begin ramping output ahead of full mass production. Some of these components may have long lead times and high failure rates, so early stock-building helps reduce risk and smooth the eventual launch pipeline.

Apple's foldable iPhone is reportedly similar in style to Samsung's Galaxy Z Fold, which uses a book-style folding mechanism, rather than the clamshell design of the Samsung Galaxy Z Flip.

When folded, users will interact with a 5.5-inch outer display that is similar to a typical iPhone screen, while unfolding it will reveal a larger 7.8-inch iPad-style screen. The inner display is said to be virtually crease-free, with some sources claiming it features an under-screen camera. The outer screen is said to have a punch-hole camera, while authentication is handled by Touch ID integrated into the side button, rather than Face ID. There's also a dual-lens camera on the rear.

According to analyst Jeff Pu, the frame is made from a mix of titanium and aluminum. Apple analyst Ming-Chi Kuo has also said Apple is using multiple materials, but he believes the main ones are titanium and stainless steel. Kuo also believes some hinge components will be made from Liquidmetal for further durability.

The foldable ‌iPhone‌ is rumored to be as thin as 4.5mm when opened up, which would make it even thinner than the ‌iPhone Air, so titanium is likely being used to prevent bending issues‌. With display and mechanical engineering challenges unlike any current iPhone, Apple's logistical groundwork hints that its first foldable device may finally be nearing reality. The ‌iPhone Fold‌ is expected to be part of the iPhone 18 lineup, launching in September 2026.
This article, "Apple Stockpiling Parts for Foldable iPhone Ahead of 2026 Launch" first appeared on MacRumors.com

Discuss this article in our forums

It is now the eve of Apple's annual iPhone event, and last-minute rumors about the iPhone 17 devices continue to surface out of China.


The latest rumors pertain to the iPhone 17 Air and the iPhone 17 Pro Max.

First, the account Fixed Focus Digital on Chinese social media platform Weibo today said the ultra-thin iPhone 17 Air is unlikely to launch in China, due to its lack of a SIM card slot. However, regulatory database listings suggested there would in fact be a variant of the iPhone 17 Air with a SIM card slot, so the situation is unclear. In any case, the iPhone 17 Air is expected to rely entirely on eSIM technology in most countries.

Second, the account Ice Universe on Weibo today reiterated that the iPhone 17 Pro Max will be 8.725mm thick, whereas the iPhone 16 Pro Max is 8.25mm thick. If this information is accurate, the iPhone 17 Pro Max would be approximately 5% thicker than the iPhone 16 Pro Max. The account previously suggested the device would be thicker in order to accommodate a larger battery with a leaked 5,088 mAh capacity.

Both of the Weibo accounts have pretty good track records. We will find out if these rumors prove to be true in around 24 hours from now.
This article, "Two More iPhone 17 Air and iPhone 17 Pro Max Rumors Drop Before Apple Event" first appeared on MacRumors.com

Discuss this article in our forums

Apple's upcoming iPhone 17 Pro models could include a reverse wireless charging feature making them capable of delivering power to other Apple devices, according to the Weibo-based leaker Fixed Focus Digital.


The Chinese leaker says that Apple has tested reverse wireless charging for the company's new high-end smartphones, but whether the feature is actually enabled when the devices launch next month remains to be seen.

This is the second time we've heard about the feature potentially coming to new iPhones this year. In February, Weibo leaker Instant Digital claimed that Apple had been testing 7.5W reverse wireless charging for the iPhone 17 Pro and iPhone 17 Pro Max, saying it could be used to charge other Apple accessories like AirPods, Apple Watch, or potentially an upcoming MagSafe Battery Pack.

Long-running rumors of iPhone reverse wireless charging capabilities finally came to fruition in 2021 – albeit in a limited way – when Apple released the MagSafe Battery Pack for iPhone 12 and newer models. When attached to an ‌iPhone‌ that was charging via Lightning, the ‌iPhone‌ could deliver power to the MagSafe Battery Pack, which was the first instance of an ‌iPhone‌ being able to route power to an accessory device.

Apple discontinued the MagSafe Battery Pack in September 2023 with the launch of the iPhone 15 lineup, which dropped the Lightning cable in favor of USB-C. iPhone 15 and later models can reverse charge Apple Watch, AirPods, and other smaller devices that support Power Delivery at up to 4.5 watts via the USB-C port, but the wireless reverse charging feature for Apple devices has not been implemented since the discontinuation of the MagSafe Battery Pack.

In 2022, supply chain analyst Ming-Chi Kuo predicted that a relaunched MagSafe Battery Pack would eventually transition to USB-C, but that has yet to happen. Likewise, In September 2023, Bloomberg's Mark Gurman also said he expected USB-C versions of the MagSafe Battery Pack to return "eventually." But he qualified that by saying "Don't hold your breath."

All will be revealed when Apple releases its iPhone 17 lineup around mid-September, with an iPhone event rumored to be taking place on Tuesday, September 9. Would you welcome a reverse wireless charging feature? Let us know in the comments.
This article, "iPhone 17 Pro May Be Able to Wirelessly Charge AirPods, Apple Watch" first appeared on MacRumors.com

Discuss this article in our forums